Where Magnias parts ship.
From PC and server motherboards to industrial PLCs to handheld consumer devices, Magnias interface, protection, and power ICs serve designs where reliability, precision, and supply stability matter.

OSFP Optical Module
Support ICs for 400G, 800G, and 1.6T pluggable optical transceivers.
- LDO + buck + analog bias LDO for the OSFP voltage tree
- Hot-plug load switches gating 3.3V rails
- Dual comparator for LPWn / RSTn and an open-drain INT buffer
Photo: PantheraLeo1359531, CC BY 4.0DDR5 DIMM
On-module power and protection for CUDIMM, RDIMM, and CAMM2.
- TVS for 5V / 12V VIN_BULK and 3.3V VIN_MGMT rails
- Chip fuses for the RDIMM and CAMM2 inputs
- LDO and MOSFET for CUDIMM RGB lighting

PC and Server
Desktop, workstation, and rack-server motherboards.
- Interface ESD on USB / PCIe / LAN / HDMI
- Common-mode + ESD on Ethernet pairs
- Hot-swap MOSFETs and rail-gating load switches

Networking
WiFi routers, switches, gateways, mesh systems, NAS, fiber CPE.
- CMF + ESD on Ethernet / RJ45 differential pairs
- Sub-pF ESD on USB-C and high-speed lanes
- Buck + LDO + load switch for 12V / 5V / 3.3V rails

Automotive Electronics
ECUs, ADAS sensors, infotainment, 48V systems.
- AEC-Q101 TVS, ESD and MOSFETs (-A versions)
- Load-dump and surge protection on 12V / 24V
- Bucks and low-noise LDOs for ECU and sensor rails

Industrial Automation Control
PLCs, instrumentation, factory automation.
- Wide-temperature, long-lifecycle supply
- RS-485 / CAN bus protection
- 24V / 48V step-down bucks, up to 60V input

Handheld and Consumer
Wearables, smart-home, personal power, audio.
- Compact, low-IQ LDOs and buck converters
- ESD-protected interface for USB-C / audio
- Small-package power switches for portable rails

LCD Monitor and Display
Monitors, TVs, signage, and panel-driver boards.
- TVS / ESD on HDMI / DP / VGA inputs
- LDO and Schottky for backlight rails
- Logic-gate translation for panel control

Motor Drive
BLDC fans, pumps, appliances, light industrial drives.
- Power MOSFET for half-bridge / 3-phase
- Schottky catch and TVS clamp
- Logic gates and LDO for gate-driver supply

Battery Module
Li-ion packs, BMS, energy-storage systems.
- Charge / discharge MOSFETs from 20V to 150V
- TVS and ESD for the pack connector and charger input
- Low-IQ LDOs and comparators for monitoring rails

Switching Power Supply
AC-DC adapters, USB-PD chargers, DC-DC modules.
- 500V to 1000V primary-side MOSFETs
- 60V to 150V synchronous-rectifier MOSFETs
- Schottky, fast-recovery and bridge rectifiers

USB-C Power Delivery
PD 3.1 chargers, sinks and power banks, 20 W to 240 W.
- Back-to-back VBUS MOSFETs for each power tier
- PD sink switches for the device side
- HV and SR MOSFETs and bridge rectifiers for the charger