7 parts
Interface Controller
,
| Part Number | Package | Function | Supply Voltage | Key Spec | Op Temp (°C) | ESD HBM (kV) | Features |
|---|---|---|---|---|---|---|---|
| MI4220 Series | SOP-16 / QFN4x4-16L | USB Bus Converter Chip (USB to RS232/RS485/RS422/UART) | 5V or 3.3V | Baud rate 200bps – 2Mbps; built-in clock on MI4220C/QC (MI4220G/QG need a 12MHz crystal) | -40 to 85 | 2 | Full-speed USB V1.1 device interface; emulates standard serial port; Windows/Linux/Mac/Android/Kernel OS; SOP-16 and QFN4x4-16L; halogen-free |
| MIDPHD5-N22 | QFN2.0x2.0-12L | ESD Protection + Signal Booster for DisplayPort 2.0 & HDMI 2.1 | VREF2 = 1.62V – 5.3V | AUX/DDC bus mode select (DP or HDMI) | -30 to 85 | 2 | Backdrive protections; DP 2.0 + HDMI 2.1; IEC61000-4-2 level 4 (8kV contact / 15kV air); JESD22-A114D; for GPU / set-top boxes / notebooks |
| MC72U02C-QRG | QFN-24L | USB 2.0 to 10/100M Ethernet Controller | Internal 0.9V and 1.8V LDO; external 3.3V | IEEE 802.3, 802.3u, 802.3az (EEE), 802.1Q VLAN, 802.1p | 0 to 70 | 3.5 | Integrated Ethernet PHY + USB PHY; SPI flash; Microsoft AOAC + Magic Packet wake; checksum offload (IPv4/IPv6/TCP/UDP); supports Win/Mac/Linux/Android/iOS/Harmony |
| MI3303X-N55 | QFN5.0x5.0-32L | HDMI to VGA Converter with Audio DAC | 3.3V I/O + 1.2V core | Up to 1920x1200 @ 60Hz; HDMI 1.4b; HDCP 1.4 | 0 to 85 | 2 | Embedded audio DAC; on-chip HDCP1.4 engine; built-in 3.3V and 1.2V LDOs; hot plug detection; ESD 2kV |
| MI2129B-F14 | DFN1410-8L | 2-Bit Bidirectional Voltage-Level Translator | VCCA 1.65V–3.6V / VCCB 2.3V–5.5V | 2 Mbps (open drain) / 24 Mbps (push-pull) | -40 to 85 | 4 | No direction-control signal needed; VCC isolation feature; partial-power-down support; for I²C / SMBus / UART / GPIO; ESD HBM 4kV / CDM 2kV |
| PLS2782-F44 | TQFN4x4-32 | 12-Channel Level Shifter (TFT GOA Panel Driver) | VIN 2.6V – 5.5V; VGH up to 30V; VGL down to -15V | 700ns max rising/falling time | -40 to 85 | 2 | Input UVLO; Thermal Overload Protection (150°C); Over Current Protection; for GOA TFT-Panel display panels |
| MUX7227A-N10 | UQFN1.4x1.8-10L | USB 2.0 480Mbps 2:1 / 1:2 Multiplexer/Demultiplexer Switch | 3.3V; 1.8 or 3.3V control logic | BW 3.3GHz; RON 3Ω @ VI/O=0.2V; 5V tolerant | -40 to 125 | 5 | Insertion loss -0.4dB @ 240 MHz; Return loss -22dB; Off isolation -32dB; compatible with USB 2.0 / eUSB2 LS/FS/HS; HBM ±5kV / CDM ±1kV |