Login / Register

3D-Top-TDFN2x2-8L-Ver.-R01

3D-Bottom-TDFN2x2-8L-Ver.-R01

PSW32

Status: ✓ Active

Package: TDFN2x2-8L
eFuse with Over Voltage Protection

Category: eFuse Tag: Power Management

Features

3-V eFuse:
PSW32H03NL/PSW32H03N/PSW32H03R
5-V eFuse:
PSW32H05NL/PSW32H05N/PSW32L05N/ PSW32H05R
12-V eFuse:
PSW32H12NL/PSW32H12N
Fixed Over-Voltage Clamp:
3.6V-Clamp:
PSW32H03NL/PSW32H03N/PSW32H03R
5.5V-Clamp:
PSW32H05NL/PSW32H05N/PSW32Lo5N/ PSW32H05R
13.6V-Clamp:
PSW32H12NL/PSW32H12N
Integrated 34mΩ Pass MOSFET
0.5A to 4A Adjustable ILIMIT
±7.5% ILIMIT Accuracy
Programmable OUT Slew Rate, UVLO
Built-in Thermal Shutdown
Fault Indication Pin (FLTB)

Application

Adapter Powered Devices
SSD and HDD Drives
Set Top Boxes
Servers / AUX Supplies
Fan Control
PCI/PCIe Cards
Hot-Swap, Hot-Plug
Multi-function Printers
Industrial Systems
White Goods
Digital TV

Parametrics

Specification	Value
FET	Internal
Ron (typ) (mΩ)	34
Vin (V)	3.0 ~ 12.6
ILM (V)	0 ~ 3
Continue Output Current (A)	0 ~ 4
Soft-Start	Adjustable
Ron (typ) (mΩ)	16
Fault response	Auto-retry, Latch-off
Overvoltage response	Clamp, Cut-off

Order Information

Part Number	Marking	Enable	Response to Thermal Shutdown (TSD)	Output Voltage Clamp	Package / Q’TY
PSW32H03NL-V8	32AA	Active high	Latch-off	3.8	TDFN2x2-8L 3,000 pcs/ Reel
PSW32H03N-V8	32AB	Active high	Auto-retry	3.8
PSW32H03R-V8	32AC	Active high	Auto-retry	3.8
PSW32H05NL-V8	32BA	Active high	Latch-off	5.7
PSW32H05N-V8	32BB	Active high	Latch-off	5.7
PSW32L05N-V8	32FB	Active low	Auto-retry	5.7
PSW32H05R-V8	32BC	Active high	Auto-retry	5.7
PSW32H12NL-V8	32CA	Active high	Latch-off	13.7
PSW32H12N-V8	32CB	Active high	Auto-retry	13.7

Pin Layout

PIN Layout	PIN	Name	Type	PIN Function
	1	dV/dT	Analog I/O	A capacitor from this pin to GND sets the output turn on slew rate. Leave this pin Floating for the fastest turn on slew rate. (See Switching Characteristics).
	2	EN/UVLO	Analog input	Active high enables for the Group A, Group C variants. A resistor divider can be used to adjust the under-voltage lockout threshold. Do not leave floating.
		ENB/OVLO		Active low enables for the Group B variants. A resistor divider can be used to adjust the over-voltage lockout threshold. Do not leave floating.
	3,4	VIN	Power	Power input.
	5	OUT	Power	Power output.
	6	FLTB	Digital output	Group A+ Group B: Fault event indicator which is pulled low when a fault is detected.
		QOD		Group C: Quick Output Discharge Pin, when tied to OUT directly or through external Resistor
	7	ILM	Analog I/O	This is a dual function pin used to limit and monitor the output current. An external resistor from this pin to GND sets the output current limit. The pin voltage can also be used to monitor the output load current. Do not leave floating.
	8	GND	Ground	Ground.
	Thermal Pad	GND	Ground	The exposed pad is used primarily for heat dissipation and must be connected to GND.

Join us as we revolutionize IC protection and empower you to unleash the full potential of your electronic systems.

Quick Links

Contact Us

E-mail:
[email protected]
[email protected]

Location:

Rm. 103, 11F., No. 150, Sec. 2, Nanjing E. Rd., Zhongshan Dist., Taipei City 104695, Taiwan (R.O.C.)

Hotline:

+886-2-7733-7550

Copyright © 2024 Magnias Incorporated. All Rights Reserved.